Model info: | 7600-SIP-400 | |
Product Description | Cisco Catalyst 6500/7600 Series SPA interface processors Module 7600-SIP-400 | |
Devide Tyde | 4 SPA bays service module | |
CPU | High performance | |
Memory | 1 GB | |
Queues | 32,000 ingress and egress | |
Switch fabric connectivity | Yes | |
Online insertion and removal of module | SIP and SPA OIR are supported | |
Supervisor engines supported | Cisco Route Switch Processor 720 3C/3CXL, Cisco Supervisor Engine 720-3B/3BXL, and Cisco Supervisor Engine 32 (Sup-32) systems | |
Software compatibility | ● Software Release 12.2(18)SXE, or later releases for Supervisor Engine 720-3B/3BXL ●Supervisor Engine 32 systems in native mode Cisco IOS Software; also, 12.2(33)SRB |
● later releases for RSP720-GE-3CXL and RSP720-GE-3C systems |
Protocols | ● TCP ● User Datagram Protocol (UDP) ● IPv4 Unicast and Multicast ● IPv6 Unicast and Multicast |
● Multiprotocol Label Switching (MPLS) ● SAToP and CESoPSN |
Encapsulation | ● Frame Relay ● Point-to-Point Protocol (PPP) ● High-Level Data Link Control (HDLC) ● ATM permanent virtual circuit-constant bit rate (PVC-CBR), variable bit rate real-time (VBR-rt), VBR non-real-time (VBR-nrt), and unspecified bit rate (UBR) |
● ATM switched virtual circuit (SVC)-CBR, VBR-rt, VBR-nrt, UBR, UBR+ ● TDM over MPLS, ATM over MPLS, and ATM over GRE ● L2TPv3 |
Features and benefits | QoS ● Modular QoS CLI (MQC) ● Classification based on: ◦ IP Precedence (IPv6 and IPv4) ◦ Diffserv code point (DSCP) (IPv6 and IPv4) ◦ MPLS experimental values (MPLS EXP) ◦ Extended ACL ◦ ATM CLP ◦ Frame Relay DE ◦ Class of Service (CoS) ◦ VLAN Congestion Avoidance ● Weighted Random Early Detection (WRED) based on IP Precedence, DSCP, MPLS EXP, ECN (mark IP TOS field for POS traffic) Queuing ● Congestion management ◦ Per-virtual circuit queuing ◦ Ingress and egress Low-Latency Queuing (LLQ) ◦ Egress Class-Based Weighted Fair Queuing (CBWFQ) Traffic Classification, Shaping, and Bandwidth Policing ● Marking ● Policing ● Distributed traffic shaping (DTS) ● Hierarchical service policies |
Security ● Standard and extended ACLs Layer 2 and Layer 3 VPNs ● Ethernet over MPLS (EoMPLS) ● ATM over MPLS (ATM over MPLS) ◦ ATM Adaptation Layer 5 (AAL5) virtual circuit mode, single and packed cell relay virtual circuit mode ● Frame Relay over MPLS (FRoMPLS) ● Layer 3 MPLS/VPN over GRE ● ATM over GRE, Ethernet over GRE ● TDM over MPLS High availability ● IPv4 Nonstop Forwarding (NSF) ● IPv4 Stateful Switchover (SSO) ● Automatic Protection Switching (APS) with ATM, POS SPAs ● OIR for both SIP and SPA Multilink support ● Frame Relay Multilink^1 (1) Added in >15.2(04)S |
Unsupported features | ● Frame Relay traffic shaping (FRTS), ISDN, Frame Relay switching, Layer 2 Tunneling Protocol (L2TP), Layer 2 Forwarding (L2F), Point-to-Point Tunneling Protocol (PPTP) ● Frame Relay switched virtual circuits (SVCs) ● Multi-chassis Multilink PPP ● FRF.5, FRF.8, FRF. 9, and FRF.15 |
● POS channel bonding ● QoS groups ● Systems Network Architecture (SNA) serial protocols (Synchronous Data Link Control [SDLC], Frame Relay Access Support [FRAS], binary network node [BNN], and boundary access node [BAN]) |
Supported SPAs | 7600-SIP-400 - POS SPAs Support ● SPA-2XOC3-POS ● SPA-4XOC3-POS ● SPA-1XOC12-POS ● SPA-1XOC48-POS ● SPA-4XOC3-POS-V2 ● SPA-8XOC3-POS ● SPA-2XOC12-POS ● SPA-4XOC12-POS |
7600-SIP-400 - ATM SPAs Support ● SPA-2XOC3-ATM ● SPA-4XOC3-ATM ● SPA-1XOC12-ATM ● SPA-1XOC48-ATM ● SPA-3XOC3-ATM-V2 ● SPA-1XOC3-ATM-V2 ● SPA-1XOC12-ATM-V2 |
7600-SIP-400 - GE SPAs Support ● SPA-2X1GE ● SPA-2X1GE-V2 ● SPA-5X1GE-V2 ● SPA-1X10GE-V2 ● SPA-2X1GE-SYNCE ● SPA-4X1FE-TX-V2 ● SPA-8X1FE-TX-V2 |
7600-SIP-400 - CEoP SPAs Support ● SPA-24XT1E1-CE ● SPA-1XOC3-CE ● SPA-2XT3E3-CE |
|
7600-SIP-400 - Serial/Channelized SPAs ● SPA-2XT3E3 ● SPA-CHOC12-STM4 ● SPA-4XT3E3 ● SPA-1XCHOC48/DS3 ● SPA-8XCHTE1 ● SPA-2XT3/E3-V2 ● SPA-CHOC3-STM1 ● SPA-4XT3/E3-V2 ● SPA-2XCT3 ● SPA-8XCHT1/E1-V2 ● SPA-4XCT3 ● SPA-1XCHSTM1/OC3-V2 ● SPA-4XT-SERIAL ● SPA-2XCT3/DS0-V2 |
||
Power Consumption | 265 W Maximum |