| Model info: | WS-X6716-10G-3CXL | |
| Product Description | Cisco Catalyst 6500 Series 10 Gigabit Ethernet interface module WS-X6716-10G-3CXL | |
| Devide Tyde | 10 Gigabit Ethernet interface Fiber module | |
| Ports | 16 * 10G X2 ports | |
| Switch fabric connection | 40 Gbps (80 Gbps full duplex) | |
| Forwarding Engine | WS-F6700-DFC3CXL | |
| routing entries | 1,000,000 | |
| Queues | Oversubscription mode ● Receive: 1 priority queue, 7 round robin queues, 2 threshold per port ● Transmit: 1 priority queue, 7 round robin queues, 4 threshold per port group |
Performance mode: ● Receive: 8 priority queue, 4 threshold per port ● Transmit: 1 priority queue, 7 round robin queues, 4 threshold per port group |
| Scheduler | Oversubscription mode: ● DWRR ● WRED |
Performance mode: ● DWRR ● WRED ● SRR at egress |
| Virtual Switch Link (VSL) | Oversubscription mode: No | Performance mode: Yes (supported in a subsequent software release) |
| Port buffers | Oversubscription mode: ● 90 MB per port group |
Performance mode: ● 200 MB per port |
| Queuing Mechanisms | ● CoS-based queue mapping ● DSCP-based queue mapping |
|
| Hardware-based Multicast replication (Layer 2) | ● Ingress and egress ● Approximately 20 GB per replication engine ● 2 replication engines per module |
|
| Hardware-based multicast replication (layer 3) | ● Ingress and egress ● Approximately 20 GB per replication engine ● 2 replication engines per module |
|
| Jumbo frame support for bridged and routed packets | Up to 9216 bytes | |
| Maximum port density per chassis | 130 ports (9-slot chassis) | |
| Maximum port density per VSS | 260 ports | |
| Supervisor engines supported | Cisco Catalyst 6500 Series Supervisor Engine VS-S720-10G-3C | |
| Chassis supported | ● Cisco Catalyst 6503-E, 6504-E, 6506-E, 6509-E, 6509-V-E, 6513-E and C6509-NEB-A chassis with dual fan tray ● Cisco Catalyst 6506, 6509, 6513, and C6509-NEB-A with single fan tray |
● Not supported in Cisco Catalyst 6503 non-E Series chassis and 7600 Series chassis |
| Slot requirements | ● Can occupy any slot in any Cisco Catalyst 6503-E, 6504-E, 6506, 6506-E, 6509, 6509-E, 6509-V-E, or 6509-NEB-A chassis | ● Can occupy only slots 9 through 13 in a Cisco Catalyst 6513 chassis |
| Onboard memory | 1 GB default | |
| Power requirement | 487.2W (11.6A @ 42V) | |
| X2 Pluggable Optics part number | ● X2-10GB-LRM(multimode fiber): 1310 nm serial, 220m over multimode fiber ● X2-10GB-LR(single-mode fiber): 1310 nm serial, 10 km over single-mode fiber ● X2-10GB-ER(single-mode fiber): 1550 nm serial, 40 km over single-mode fiber ● X2-10GB-ZR: 1550 nm serial, 80 Km over single-mode fiber |
● X2-10GB-SR(multimode fiber): 850 nm serial, up to 300m over multimode fiber ● X2-10GB-LX4(multimode fiber): WWDM 1310 nm, up to 300m over multimode fiber |
